Quote:
Originally Posted by musc
I know you had new coils put in but was that before or after the Mosfets died? When the Mosfet pops it takes out the coil with it so if your Mosfet situation happened afterwards then replace the coils, even if you just put new ones in prior to the Mosfet issues.
As Jeff said, the BMS spark plug tool is nice. Has a good magnet to hold the sparkplug in when pulling it out.
|
The sparkplugs were previous to the DME incident, though the coils were after the DME was repaired.
And I'm going to need to order the tool asap!
