Quote:
Originally Posted by Gen13 F36
Quote:
Originally Posted by 328iking
I researched that a lot of people buy the 335i/340i back box and fit to a 328i.
I purchased a 340i exhaust system and cut the rear box off it.
However, my local bmw specialist garage said they can't do it as the pipe is too flat? They apparently have fitted plenty to the diesels as they are more rounded. Apparently there is sleeve they used and it won't fit this shape of pipe.
Pics show the pipe shape and where I cut it from the full exhaust.
am confused. Can this be fitted or have I wasted my money on this exhaust?
|
According to the picture you posted, the exhaust was cut on the wrong area.... look closely you should see a dimple 3" to 4" from where its cut. That were should be cut
Then look at your 328i exhaust should have the same dipple... I just hope you haven't cut it yet on the wrong spot or else you need some exhaust shop to install this by welding.
Good luck
|
Where about a roughly in my pic of the full exhaust system. Yes it's already cut. Based on the advice of the garage. Most exhausts for sale in UK are cut just after the box? So I left more.