[Eqwoot]

For the Dash camera I have used the fuse 55 for VCC power because it instant shut off the camera once the ignition is off and go into parking mode instead of 5 mins later. For ACC constant power I have used fuse 104 as suggested on other thread.

Some tips also mentioned before:

1) no need to remove the whole glove box, there is a small piece of cover under the glove box where after removed you can find place for ground and access to fuse 104.

2) to install the back camera you can remove the cover the middle seat belt and you will have access to put a wire to the hood going to the trunk. I have took some photos and it should help.