Quote:
Originally Posted by jdbretz
Download the 3-30 DIC firmware, and upload it to the Procede. Follow the directions in the Read ME file for uploading and resetting adaptations. With your mods and 94 octane you should be safe running 14 psi. Since there is no autotuning, you'll have to go to the User Adjustable Parameters and set your Start Boost at 40. If you are worried about it, you can leave it at the default setting which is 13.5 psi. If you wanted to confirm your car is running fine on 14 psi you'll have to datalog and look at your timing curve to make sure the car isn't pulling timing.
|
sorry for OT what about this
http://www.e90post.com/forums/showpo...07&postcount=8