Quote:
|
Originally Posted by techmaster05
Quote:
Originally Posted by Sean_335i
What you are describing definitely sounds like air in the brake lines to me. You said that you changed your brake fluid, did you completely empty the reservoir all the way down to the master cylinder? If so, you got air into the abs lines, and you need to bleed them as well.
|
I did not take all the fluid out before putting in new fluid. When changing the lines i basically put a cap on the lines coming from the car so that way no fluid would leak out while i had the calipers off with the lines on calipers. I took out as much old fluid from the reservoir before doing the full bleed with the motive bleeder. I'm not sure how i would get air into the abs lines unless i completely bled the system dry, or am i wrong??
I did do a quick search on doing the abs and i think you need software to activate the pump??? IS there a way to bleed the abs without purchasing software?? |
You can find a slippery/dirty/icy surface somewhere and brake firmly