On our cars, the tailpipes are big diameter, I removed the cerium grey tip this morning and the end pipe on the stock exhaust under it is 81mm diameter, so need something bigger to fit over that, also there's a locating pin so to have new tips, they would either have to be very similar to the OEM ones in size or those short one's on various shops on the internet would need to be very short, and the shortest I could find was 90mm length which are no good unless they have a groove cut out so they can fit over the locator pin. Always a pain with our cars, they've been out for almost a year and you can't even get a K&N air filter for them! (had the Pipercross, poor manufacturing quality with paint peeling off the black mesh then imaging those paint fragments sucked into my turbo!)
|