I have done some investigations as follows;
1. checked all wires for damage
2. replaced cable from camera to TRSVC
3. replaced TRSVC
4. checked solder connection to canbus
5. continuity test from yellow/white/clear from TRSVC connector to CIC head unit
6. checked power to TRSVC - i am getting 11.5v, whereas the pic below shows 14v? Could it be somehow related to that?
Quote:
Originally Posted by SaNGRia
|
Power to TRSVC seems to come in via the yellow connector which comes from the main loom near the MULF connector.
suppose next is a chance on a new camera?
but if anyone has any further ideas?