|
Maybe pictures will help. Check attachments.
01 - general view of the area where the filters are, you need to really dive under the glovebox...
First remove the panel below the glovebox, there are two tabs you need to turn by 90 degrees and the panel should just fall down.
Second remove the single screw holding the second panel, pull from the front and it should come off easily
02 - once you remove both panels as described in 01, this is how it should look like
Once you're there just open the filter cover, pull out two old filters and put new ones in the same orientation (observe airflow direction marked on the ones you remove)
03 - close up of the filter door and hole
Hope it helps!
|