Quote:
Originally Posted by FrankMstein
This is what we need. I would like to understand how they are mounted to the control are stud/bolt.
|
The control arm bolt sticks out 8,5 mm with the nut fully torqued. The ducts mounting adds 2 mm and a washer 1,5 mm, so there will be 4,5-5 mm thread left which is enough to hold a duct in plastic. I will add a low nut in the kit and if you tighten the nut with a dab of thread lock it will stay in place. This way you don't have to remove the control arm nut and get the toe alignment out of order.