|
Just finished a valve cover job on f10 N52 engine straight 6.
The job was much easier than most other f10 engines. I did not have to take the fuel rail.
Also I ordered 2 other gaskets- 1 for valvtronic motor and the other in the front. Replacing the CCV valve was not too bad.. heat gun helps with taking off the old one.
You don't have to buy the whole Valve cover.. Costs- Canadian - roughly $100 for gaskets and CCV valve vs 250? or so for the whole valve cover with all the seals. Just me 2c.
Desmond.
|